Tools
Phillips Screwdriver
*1
Microfiber Cloth
*1
Make sure to unplug the tower fan before cleaning. Safety is always the first priority.
First, remove the screw on the upper side of the back. Rotate the screwdriver in the counter-clockwise direction. Then pull up the grille through the screw hole and take the grille away.
Unscrew the lock at the bottom of the impeller in the counter-clockwise direction as shown. Please keep the screw with care.
Lift up the impeller and tilt it to a certain angle. Then you will be able to pull out the impeller. After removing the impeller, you could wipe to clean the interior of the tower fan.
Wash the impeller and grille. Caution: Make sure to dry the impeller and grille thoroughly before reassembling.
Insert the impeller to the top of tower fan. Then align the screw holes of the impeller and the axis at the bottom as shown. Finally, lock the impeller with a Phillips screwdriver.
Insert the grille into the holes as shown. Then lock it to the back. Finally put the screw back into the hole on the upper side at the back in clockwise direction.
Was this article helpful?
Not Helpful
Helpful